AgeSin® DF-S6680A is a 100% active polysiloxane blend containing special deaeration particles. It provides highly effective foam suppression and bubble destruction, with broad applicability in solvent-based systems. The product is particularly suitable for primers and high-viscosity systems, effectively eliminating bubbles generated during production and application of solvent-based coatings, and preventing pinholes and surface defects,can be used as the alternative to Elementis Defom 6800.
AgeSin® DF-S6680A
(Silicone Defoamer for High-Solids, Solvent-Free Epoxy Floor Coatings & UV Systems)
AgeSin® DF-S6680A is a 100% active polysiloxane blend containing special deaeration particles. It provides highly effective foam suppression and bubble destruction, with broad applicability in solvent-based systems. The product is particularly suitable for primers and high-viscosity systems, effectively eliminating bubbles generated during production and application of solvent-based coatings, and preventing pinholes and surface defects,can be used as the alternative to Elementis Defom 6800.
Chemical Composition | Polysiloxane blend containing deaeration particles |
Appearance | Translucent liquid |
Viscosity (cps @ 25°C) | 100 – 1500 |
Density (g/cm³ @ 23°C) | 0.90 – 1.10 |
Active Matter (%) | 100 |
This data sheet is intended to give typical results, not standard.Subject to COA.
Epoxy systems
Solvent-Free Systems
UV-Curable Coatings & Inks
Screen Printing Inks
Highly effective foam suppression and bubble destruction
Broad compatibility in solvent‑based coatings
Especially suitable for primers and high‑viscosity systems
Prevents pinholes and surface defects during production and application
High-solids epoxy floor coatings
Solvent-free epoxy floor coatings
UV-curable coatings and inks
Screen printing inks
2K epoxy and polyurethane systems
For best results, add before grinding. If added at a later stage, high shear mixing is required to ensure maximum efficiency and minimize side effects.
Suggest addition: 0.05% – 1.0%
Packaging: Available in 25 kg and 200 kg drums.
Storage: Store in a cool, dry, well-ventilated place in the original, tightly sealed container. Protect from direct sunlight, heat sources, and frost.
Shelf Life: 12 months when stored under recommended conditions.
Disclaimer: The information provided is based on our current knowledge and experience. It is intended as a guide and does not constitute a warranty of specific properties. We recommend testing the product's suitability for your specific process and application.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
