Agesin DF-D9099 AT is a high-performance, multi-purpose silicone defoamer designed for industrial processes and product performance enhancement. It is specially formulated for foam control in PCB ink (solvent-based) and epoxy floor coating systems. It exhibits excellent bubble-breaking efficiency and rapidly eliminates fine bubbles. Due to its superior performance, the required dosage is significantly lower than that of other defoamers in most systems. Recommended for non-aqueous systems.
AgeSin® DF-D9099 AT
(silicone-based defoamer for solvent-based PCB Ink )
Agesin DF-D9099 AT is a high-performance, multi-purpose silicone defoamer designed for industrial processes and product performance enhancement. It is specially formulated for foam control in PCB ink (solvent-based) and epoxy floor coating systems. It exhibits excellent bubble-breaking efficiency and rapidly eliminates fine bubbles. Due to its superior performance, the required dosage is significantly lower than that of other defoamers in most systems. Recommended for non-aqueous systems.
Composition | Special Organic Polymer Copolymer |
Appearance | Light gray translucent liquid |
Solid Content | > 99.0% |
Viscosity @ 25°C | 150 – 600 mPa·s |
This data sheet is intended to give typical results, not standard.Subject to COA.
Solvent-based
Excellent bubble-breaking ability
Rapid elimination of fine bubbles
Low dosage requirement
Suitable for non-aqueous systems
Agesin DF-D9099 AT has low solubility in water and lower alcohols but is soluble in benzene, toluene, and mineral oil.
Recommended dosage: 10 – 1000 ppm, depending on the foam-forming substances in the system. For specific systems, dosage may exceed 1%. Optimal dosage should be determined through small-scale testing.
Shake well before use. Can be diluted with recommended solvents.
Printed circuit board (PCB) solvent-based inks
Epoxy floor coatings
Adhesive systems
25KG / 50KG/ 200KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Keep intact 6 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
