Agesin DF-D9029 AT is a highly efficient, multi-purpose silicone defoamer suitable for industrial processes and product performance improvement. It is especially effective in solvent-based polyurethane systems and epoxy floor coatings, offering outstanding bubble-breaking performance and rapid elimination of fine bubbles. Thanks to its exceptional efficiency, the required dosage is significantly lower than conventional defoamers. Recommended for non-aqueous systems.
AgeSin® DF-D9029 AT
(High-compatibility silicone defoamer for solvent-based polyurethane and epoxy systems)
Agesin DF-D9029 AT is a highly efficient, multi-purpose silicone defoamer suitable for industrial processes and product performance improvement. It is especially effective in solvent-based polyurethane systems and epoxy floor coatings, offering outstanding bubble-breaking performance and rapid elimination of fine bubbles. Thanks to its exceptional efficiency, the required dosage is significantly lower than conventional defoamers. Recommended for non-aqueous systems.
Composition | Special Organic Polymer Copolymer |
Appearance | Light gray translucent liquid |
Viscosity @ 25°C | 2000 – 5000 mPa·s |
Solid Content | 100% |
This data sheet is intended to give typical results, not standard.Subject to COA.
Solvent-based
Excellent compatibility
Low dosage requirement
Specially designed for solvent-based polyurethane systems
Recommended dosage: 10 – 1000 ppm, depending on the foam-forming substances in the system. For specific applications, dosage may exceed 1%. Optimal dosage should be determined through small-scale testing.
Shake well before use. Can be diluted with suitable solvent
Solvent-based polyurethane systems
Solvent-based epoxy resins
Flexible sheet production additives
25KG / 120KG/ 200KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Keep intact 6 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
