AgeSin® DF-L230D is a defoamer concentrate designed for water-based formulations. It demonstrates exceptional defoaming performance during the grinding (dispersion) stage. It is particularly suitable for use in pure acrylic emulsion systems, styrene-acrylic emulsion systems, and PU dispersion systems. It finds wide application in wood and furniture coatings, architectural paints, flexographic and gravure inks, pigment concentrates.
AgeSin® DF-L230D
(Water-based Defoamer,similar to TEGO Foamex 810 )
AgeSin® DF-L230D is a defoamer concentrate designed for water-based formulations. It demonstrates exceptional defoaming performance during the grinding (dispersion) stage. It is particularly suitable for use in pure acrylic emulsion systems, styrene-acrylic emulsion systems, and PU dispersion systems. It finds wide application in wood and furniture coatings, architectural paints, flexographic and gravure inks, pigment concentrates
Composition | Polyether siloxane copolymer |
Appearance | Pale yellow, turbid liquid |
Active Content | 100% |
Solubility in Water | Good |
This data sheet is intended to give typical results, not standard.Subject to COA.
Water-based.
Specifically effective as a defoamer concentrate for water-based formulations.
Excellent defoaming performance during the grinding/dispersion phase.
Particularly suitable for pure acrylic emulsions; also applicable to styrene-acrylic emulsions, PU dispersions, and hybrid systems.
Very good compatibility and high efficiency.
Optimal Addition Point: It is especially suitable for addition during the grinding stage.
For Let-down/Adjustment Stage: If adding during the let-down (tinting) stage or to clear varnishes, high-shear mixing conditions or pre-dilution are required.
Important Note: The long-term effectiveness (persistence) of the defoamer depends on the specific formulation system and should be tested in different recipes. It is recommended to conduct tests under different temperature conditions.
Wood & Furniture Coatings and Parquet Lacquers
Architectural Paints
Industrial Coatings
Flexographic and Gravure Inks
Pigment Concentrates
Automotive Paints
Inkjet Inks
Leather Coatings based on PU and Acrylic Emulsion systems
Packaging: Available in 25 kg ,50kg and 200 kg drums.
Storage: Store in a cool, dry, well-ventilated place in the original, tightly sealed container. Protect from direct sunlight, heat sources, and frost.
Shelf Life: 24 months when stored under recommended conditions.
Disclaimer: The information provided is based on our current knowledge and experience. It is intended as a guide and does not constitute a warranty of specific properties. We recommend testing the product's suitability for your specific process and application.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
