AgeSin® DF-L9030 is an acrylate-polyvinyl ether copolymer defoamer manufactured as an alternative to Flowlen AC-300-100 for solvent-based, solvent-free, and UV-curable coatings.
AgeSin® DF-L9030
(Defoamer for solvent-based / solvent-free / UV systems,similar to Flowlen AC-300-100)
Composition | Acrylate-polyvinyl ether copolymer |
Appearance | Pale yellow liquid |
Solvent | / |
Content | 100% |
Viscosity | 2,500 mPa·s |
Flash Point | 170°C |
This data sheet is intended to give typical results, not standard.Subject to COA.
Solvent-based,solvent-free, UV cure.
Excellent in baking finishes.
Effective in low/mid/high polarity systems (PU, PE, etc.).
Non-volatile solvent, non-hazardous.
High safety in high-viscosity/thick-coat systems.
Suitable for all solvent-based/solvent-free coatings:
✓ PE, acrylic, vinyl-acrylate, PU-acrylic, epoxy, PU
✓ Baking finishes: alkyd-melamine, polyester-melamine
Add during final adjustment or pigment dispersion
0.2-1.5 % of total formulation (trial optimization required)
Packaging: Available in 25 kg ,50kg kg drums.
Storage: Store in a cool, dry, well-ventilated place in the original, tightly sealed container. Protect from direct sunlight, heat sources, and frost.
Shelf Life: 24 months when stored under recommended conditions.
Disclaimer: The information provided is based on our current knowledge and experience. It is intended as a guide and does not constitute a warranty of specific properties. We recommend testing the product's suitability for your specific process and application.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
