AgeSin® DF-A5530 is a high-efficiency silicone defoamer manufactured for epoxy and solvent-based anticorrosion coatings. It provides strong defoaming and deaeration performance, serving as a direct alternative to BYK-A 530.
AgeSin® DF-A5530
Defoamers and Air Release Additives for Epoxy & PUR System
Equivalent alternative: BYK-A 530
Composition | Silicone and polymer solution |
Appearance | Transparent liquid |
Solvent | Hydrocarbon mixture |
Density | 0.85-0.95g/ml(25±1)℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
Solvent-based and solvent-free
AgeSin® DF-A5530 has strong defoaming and deaeration properties, which can reduce the foam formed during product production and processing to obtain a bubble-free and smooth surface. It is very suitable for epoxy resin systems and is recommended for anti-corrosion coatings. It can also be used in protective coatings, industrial coatings, automotive coatings, wood and furniture coatings, and coil/can coatings.
For best performance, the defoamer should be added to the grind before grinding. If added at a later stage, high enough shear forces are required to ensure good dispersion of the defoamer to prevent craters.
0.1-1.0% additive dosage (purchased form) is based on the total formulation.
The above data is empirical dosage, and the optimal dosage needs to be determined through a series of tests.
● 25KG / 180KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
