AgeSin®DF-D9019 is a kind of Polysiloxane-Special Organic Polymer Copolymer defoamer ,with 100% active,Good defoaming properties,Suitable for use in varnish and paint formulations,Suitable for grinding processes,Can be used in Water-based system to replace BYK-019.
AGESIN® Defoamer-Polysiloxane-Special Organic Polymer Copolymer
Product Name: AgeSin® DF-D9019
| Composition | Polysiloxane-Special Organic Polymer Copolymer |
| Appearance | Slightly turbid liquid |
| Solvent | — — |
| Content | ≥95%(105℃ 3h) |
| Ionic properties | Non-ionic |
| Viscosity | 50-100mPa·s (Rotary viscometer)(25±0.2)℃ |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● Water-based.
● 100% active
● Good defoaming properties
● Suitable for use in varnish and paint formulations
● Suitable for grinding processes
● The recommended addition amount is 0.1% to 0.5%. The specific amount should be determined after testing different emulsion systems.
● It needs to be stirred before use, and it is best to dilute it with the recommended solvent before use.
● This product is particularly suitable for adding to the grinding material.
● To improve the mixing efficiency, it can be pre-diluted with a solvent.
● If used in the ink (paint) process, it must be high sheared or pre-diluted.
● Water-based epoxy system
● Water-based color paste grinding process
● Styrene/acrylic system
● Pure acrylic emulsion
● Polyvinyl alcohol (PVA)
● 25KG / 20KG/ 200KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
