AgeSin® DF-A5057
(Silicone-free defoamer,similar to BYK-057)
Appearance | Colorless transparent liquid |
Density @23°C (g/cm³) | 0.80-1.00 |
Active Content (%) | 100 |
This data sheet is intended to give typical results, not standard.Subject to COA.
Solvent-borne and UV Curing.
Suitable for unsaturated polyesters, acrylics, vinyl acetates, epoxies, and oil-free polyesters
Functions as both a defoamer and leveling agent
Prevents foam formation during manufacturing and application of printing inks
Provides rapid bubble-breaking effect without affecting intercoat adhesion
Industrial coatings
Wood and furniture coatings
Coil coatings
Anticorrosive coatings
Particularly recommended for solvent-free radiation-curable printing inks and varnishes
0.1-1.5% on total formulation (as supplied)
Optimal dosage should be determined through testing
For best performance, add during the grinding stage. If added later, ensure sufficient shear force to achieve good dispersion and prevent cratering.
● 25KG / 50KG/ 200KG Drum
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
Keep intact 6 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
