New material research and development, performance optimization and sustainable development innovation
AgeSin® DF-G9330 is a silicone-based defoamer manufactured as a cost-effective alternative to BYK-330 for epoxy, PU, UV, and alkyd coatings as an alternative to BYK 330.
Silicone-based defoaming compound
BYK 330
Solvent-based, UV cure.
25KG,200KG/drum
AgeSin® DF-G9555 is a polymeric defoamer manufactured for unsaturated polyester gel coats and epoxy potting compounds as an alternative to BYK-A555.
Vinyl copolymer
BYK-A555
Solvent-based, UV cure.
25KG,200KG/drum
AgeSin® DF-A5066N is a defoamer manufactured for solvent-based and UV-curable coatings as an alternative to BYK066N.
Defoaming polymer silicone solution
BYK 066N
Solvent-based, UV cure.
25KG,180KG/drum
AgeSin® DF-A5063 is a defoamer manufactured for water-based and UV-curable coatings and inks, offering excellent foam suppression.
Polyether siloxane emulsion containing hydrophobic particles.
Tego Airex 902W
Water-based,UV curing
25KG,120kg or 200KG/drum
SINOMER® TCDDMA (Tricyclodecane Dimethanol Dimethacrylate, CAS 43048-08-4) is a high-Tg difunctional methacrylate monomer manufactured for UV-curable inks, coatings, and adhesives,replace Sartomer SR834,NK Ester DCP.
Tricyclodecane Dimethanol Dimethacrylate
43048-08-4
C20H28O4
25,200 kg/ drum
SINOMER® UVU6315 is a trifunctional aliphatic urethane acrylate oligomer. It features low viscosity, fast curing speed, excellent film flexibility, outstanding yellowing resistance, and good adhesion.
Aliphatic Urethane Acrylate Oligomer
10,000 – 30,000
3
≤1
Package
SINOMER® UVU6221 PCD is a polycarbonate-based urethane acrylate oligomer manufactured for high-performance UV nail gels and plastic coatings.
Polycarbonate-based Urethane Acrylate Oligomer
3,000 - 4,500
2
≤80
≤2
20,200kg/drum
SINEPOXY® CA-HC1090 EL is a high-purity, heat-initiated cationic curing agent manufactured for epoxy-based electronic coatings, inks, and adhesives.
Hexafluoroantimonate blocked amine salt
Heat-Initiated Cationic Epoxy Curing
White powder
90 °C (for cycloaliphatic epoxy)
