AGESIN® Polyether modified polydimethyl siloxane
Product Number: AgeSin® LA-D557
Equivalent alternatives: DOW CORNING 57
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | slight yellowish clear liquid(paste at low temperature) |
| Solvent | —— |
| Density | 1.01-1.05g/ml(25±1)℃ |
| Viscosity | 25-60s(Tu-4 viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure
● Provide a slight reduction of the surface tension.
● Reduce the friction coefficient. Increase slip and improve scratch resistance.
● Good recoating and minimal influence on adhesion of coating films.
● Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality,
Easy to add with pre-diluted solvent the same as that in the coating system. Can post-addition.
Suggest addition
Addition to total formulation 0.01-0.5%
Storage stability
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediatelyafter use.
Transparency in varnish : 4
Defoaming : 0
Dynamic surface tension : 4
Static surface tension : 2
Slip : 3
Prevent orange peel : 1
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
