AGESIN® Polyether modified polydimethyl siloxane
Product Number: AgeSin® LA-D5510
Equivalent alternatives: BYK-UV3510(AgeSin® LA-D5510 does not freeze in winter)
| Composition | Polyether modified polydimethyl siloxane |
| Appearance | slight yellowish clear liquid(paste at low temperature) |
| Solvent | —— |
| Density | 0.99-1.03g/ml(25±1)℃ |
| Viscosity | R-Y(Bubble viscometer)(25±0.2)℃ |
| Active substance | 100% |
| Flash point | ＞100℃ |
This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure
● Provide a stronger reduction of the surface tension.
● Reduce the friction coefficient. Increase slip and improve scratch resistanceand anti-stick
● Suit for UV high speed printing ink, and UV optical fiberink
● Hazy and viscous may occure at low temperatures. It would become clear and flow after heated. This will not influence the quality.
Easy to add with pre-diluted solvent the same as that in the coating system. Can added as post-addition.
Suggest addition
Addition to total formulation 0.01-0.5%
Storage stability
Keep intact 24 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediatelyafter use.
Transparency in varnish : 4
Defoaming : 1
Dynamic surface tension : 5
Static surface tension : 5
Slip : 5
Prevent orange peel : 1
0=unavailable 5=very effective
● 25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
