SINOMER® UVP4299X-3D is a polyester acrylate resin with high-hardness, low-yellowing,the curing coating is volatile at high temperature,can be used in 3D printing and investment casting,as an alternative to Sartomer N3D-C179.
SINOMER® UVP4299X-3D
(Polyester Acrylate Resin for 3D Printing)
SINOMER® UVP4299X-3D is a polyester acrylate resin with high-hardness, low-yellowing,the curing coating is volatile at high temperature,can be used in 3D printing and investment casting,as a direct alternative to Sartomer N3D-C179.
Appearance | Clear liquid |
Color (APHA) | ≤ 50 |
Viscosity (cps, 25°C) | 90–180 |
Acid Value (mgKOH/g) | ≤ 2.0 |
Specific Gravity (g/cm³) | 1.10 ± 0.02 |
Refractive Index (25°C) | 1.500 ± 0.005 |
Solid Content (%) | 100 |
High cured hardness
Low yellowing tendency
Suitable for high-temperature volatilization after curing
Designed as a direct alternative to Sartomer N3D-C179
Used for 3D printing casting patterns.
LED UV is the primary curing source for current UV printers.
Compatible with LCD printer systems. Recommended exposure: 4 s at 100W for optimal results.
1. Design & 3D printing
2. Investment casting
3. Clean burnout – Temperature ramp to 600–800°C, process duration 2–3 hours
4. Cooling & dissolving
5. Finished product
Ultrasonic cleaning pool (to remove residual resin)
Post-curing oven (for additional light curing to achieve desired properties)
Packaging: 25kg or 200kg/drum
Storage:
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
