SINOMER® UVC8007
( phosphate acrylate monomer-Adhesion Promoter,non-methyl)
Sinomer® UVC8007 is a 2F-phosphate acrylate monomer designed as a high-performance additive for UV-curable systems. It is characterized by its hydrophilic nature (while remaining water-insoluble) and its exceptional ability to promote adhesion on difficult substrates. It offers a fast curing rate and is primarily used to enhance the bonding of UV coatings, inks, and adhesives to various metals, plastics.
Appearance | Clear liquid |
Color (APHA) | ≤ 300 |
Viscosity (cps @ 25°C) | 200 - 400 |
Acid Value (mg KOH/g) | 80 - 105 |
Specific Gravity (g/cm³) | 1.12 ± 0.02 |
Refractive Index (25°C) | 1.468 ± 0.005 |
Active Content (%) | 100 |
Hydrophilic but insoluble in water.
Fast curing rate.
Promotes adhesion to various substrates (e.g., metals, plastics).
Recommended dosage: 1% - 5%.
Sinomer® UVC8007 is recommended for use in:
Vacuum metallization UV coatings (middle coat & topcoat).
UV varnishes for various metals.
Adhesion promoter (for melamine, PMMA, etc.).
UV adhesives (for glass, metal).
UV inks.
25kg,200kg/drum.
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
