Agesin® UV-D7700D is a reactive silicone additive with acrylate functionality, specifically designed for UV-curable systems. It provides excellent anti-fouling properties, remarkable defoaming capability, and reduced friction coefficient, making it particularly suitable for UV-resistant formulations on PVC flooring and reverse UV varnish primers,better alternative to Tego rad 2700.
AGESIN® Acrylated Polydimethylsiloxane
Product code: AgeSin® UV-D7700D
General information:
Agesin® UV-D7700D is a reactive silicone additive with acrylate functionality, specifically designed for UV-curable systems. It provides excellent anti-fouling properties, remarkable defoaming capability, and reduced friction coefficient, making it particularly suitable for UV-resistant formulations on PVC flooring and reverse UV varnish primers,better alternative to Tego rad 2700.
| Composition | Reactive silicone additive with acrylic acid functional group |
| Appearance | Slight yellowish to yellowish turbid liquid |
| Solvent | —— |
| Density | 0.96-1.00g/ml(25±1)℃ |
| Viscosity | 3000-10000 mPa·s |
| (Rotating viscometer)(25±0.2)℃ | |
| Active substance | 100% |
| Flash point | ＞100℃ |
Note: This data sheet is intended to give typical results, not standard.Subject to COA.
● UV Cure.
Radiation-curable reactive silicone additive with excellent defoaming ability.
Significantly reduces dynamic friction coefficient and provides a remarkable peeling effect.
In solvent-free UV matte coatings, an addition level of approx. 0.5% already provides excellent anti-graffiti performance.
Recommended to be used with 0.1% AgeSin® UV-D7220 for balanced leveling.
Specially suitable for PVC floor UV anti-stain formulations and reverse UV varnish primers.
Easy to add with pre-diluted solvent the same as that in the coating system.
Can added as post-addition.
Addition to total formulation 0.1-1.0%
Mobility : 0
Slip : 5
Stick resistance : 4
Substance wetting : 0
Defoaming : 5
0=unavailable 5=very effective
Name | Ratio | Description |
Sinomer UV Resin | 45% | Epoxy or polyurethane type, a functionality >6 is recommended,like UVU6000 and UVE3000 series products. |
Sinomer DPHA | 12% | Multifunctional monomer |
Sinomer DPGDA | 25% | 2-functional monomer |
AgeSin® UV-D7700D | 2.0% | Anti-graffiti additive |
Sinocure 1173 | 2.0% | Photoinitiator |
Sinocure 184 | 3.0% | Photoinitiator |
Matting Agent | 10% | e.g., E1011 |
Total | 100 |
25KG / 180KG
Being kept in dry, clean warehouse with well ventilation.
Avoid exposing to light and heating.
Protecting the product from leakage, rain and insolation during transportation.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
