The AgeSin® AG-D Series is a comprehensive family of anti‑graffiti and easy‑to‑clean additives designed for solvent‑based coating systems. Engineered with hydroxy‑functional silicone chemistries, these additives chemically bond into the coating matrix, delivering long‑lasting surface protection against markers, dirt, and graffiti – without compromising optical clarity or recoatability.
Whether you are formulating two‑pack PU topcoats, automotive clearcoats, industrial paints, or high‑traffic architectural finishes, the AgeSin® AG-D Series offers a drop‑in replacement for leading benchmark products with comparable or superior performance and cost‑effective pricing.
| Product | Composition | Active Content | Solvent | Key Features | Direct Replacement |
|---|---|---|---|---|---|
| AgeSin® AG-D9000 | Polydimethylsiloxane with hydroxy group | 100% | Solvent‑free | Solvent‑free, hydroxy‑functional, outstanding anti‑graffiti and marker resistance | Tego Protect 5000 / 5000N (superior performance vs. 5000N) |
| AgeSin® AG-D9001B | Polydimethylsiloxane with hydroxy group | 25±3% | Xylene | Polyester‑modified silicone, improves slip, solvent resistance, anti‑blocking | BYK‑370 |
| AgeSin® AG-D9302C | Silicone‑modified polyacrylate with hydroxy functional groups | 25% | Butyl acetate / PMA | Lotus‑leaf effect, anti‑marker wiping, excellent compatibility, slip enhancement | BYK‑SILCLEAN 3700 |
| AgeSin® AG-D9750R | Polydimethylsiloxane with hydroxy functional group solution | 50% | DPMA | Higher active content, lower dosage required, water‑borne & solvent‑borne compatibility | BYK‑SILCLEAN 3720 (higher solids, lower addition level) |
Equivalent to: Tego Protect 5000 / Tego Protect 5000N
AG‑D9000 is a 100% active, solvent‑free hydroxy‑functional polydimethylsiloxane that provides outstanding anti‑graffiti protection and marker resistance.
Key advantages:
Superior to 5000N – Delivers better anti‑graffiti performance compared to Tego Protect 5000N
Solvent‑free formulation – Zero VOC contribution, ideal for low‑emission coatings
Hydroxy‑functional – Chemically bonds into acrylic/isocyanate and polyester/isocyanate two‑pack systems
Excellent hydrophobicity & oleophobicity – Repels water, oils, and marker inks
Additional release effect – Provides easy clean‑up and anti‑blocking properties
Recommended dosage: 0.5 – 3.0% on total formulation
Hydroxyl value: 45 – 60 mg KOH/g
Best for: High‑performance two‑pack PU topcoats, automotive clearcoats, industrial maintenance coatings.
Equivalent to: BYK‑370
AG‑D9001B is a polyester‑modified, hydroxy‑functional polydimethylsiloxane solution that strongly reduces surface tension while improving slip, solvent resistance, and weather resistance.
Key advantages:
Polyester‑modified silicone – Provides excellent compatibility with solvent‑borne coatings and UP gel coats
OH‑functional – Reactively anchored into the coating surface for long‑lasting effect
Improves surface slip – Enhances scratch resistance and anti‑blocking
Reduces dirt pickup – Keeps surfaces cleaner for longer
Excellent weather resistance – Maintains performance under UV exposure
Recommended dosage: 1.0 – 5.0% on total formulation
Hydroxyl value: 10 – 30 mg KOH/g
Best for: Solvent‑borne coatings, UP gel coats, automotive and industrial topcoats requiring durable slip and anti‑graffiti properties.
Equivalent to: BYK‑SILCLEAN 3700
AG‑D9302C is a silicone‑modified polyacrylate with hydroxy functionality, specifically designed to deliver lotus‑leaf effect and superior anti‑marker wiping performance.
Key advantages:
Silicone‑modified polyacrylate backbone – Excellent compatibility with most resin systems
Lotus‑leaf effect – Water and dirt bead up and roll off the surface
Anti‑marker wiping performance – Resists permanent markers and graffiti sprays
Hydroxy‑functional – Crosslinks into the coating network for permanence
Increases surface slipperiness – Reduces friction and improves scratch resistance
Excellent compatibility – Works in clearcoats without affecting transparency
Recommended dosage: 2.5 – 5.0% on total formulation
Flash point: >100°C
Best for: High‑end automotive clearcoats, furniture coatings, architectural topcoats requiring easy‑clean surfaces and anti‑graffiti protection.
Equivalent to: BYK‑SILCLEAN 3720
AG‑D9750R features 50% active content – double the solids of competing products – enabling lower addition levels while maintaining superior performance.
Key advantages:
Higher active content (50%) – Lower dosage required vs. BYK‑SILCLEAN 3720
DPMA solvent – Environmentally friendlier solvent system
Water‑borne & solvent‑borne compatible – Versatile for multiple coating technologies
Excellent water contact angle – Superior hydrophobicity at 5% addition
Good compatibility in varnish – Maintains optical clarity
Anti‑graffiti & tape release properties – Dual functionality for easy cleaning
Recommended dosage: 1.0 – 10.0% on total formulation
Flash point: >70°C
Best for: Water‑borne and solvent‑borne topcoats, industrial finishes, and applications where higher active content enables lower overall additive load.
| Property | AG-D9000 | AG-D9001B | AG-D9302C | AG-D9750R |
|---|---|---|---|---|
| Active content | 100% | 25% | 25% | 50% |
| Solvent‑free | ✅ | ❌ | ❌ | ❌ |
| Hydroxy‑functional | ✅ | ✅ | ✅ | ✅ |
| Anti‑graffiti | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ |
| Marker resistance | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ |
| Hydrophobicity | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ |
| Slip improvement | ⭐⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐ |
| Compatibility | ⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ |
| Cost‑effectiveness | ⭐⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐ | ⭐⭐⭐⭐⭐ |
All AgeSin® AG-D products can be incorporated by pre‑dilution with the same solvent used in the coating system, or added post‑addition. For best results, dilute to 10–20% with xylene or the system solvent before adding to the formulation.
| Product | Recommended Addition |
|---|---|
| AG-D9000 | 0.5 – 3.0% |
| AG-D9001B | 1.0 – 5.0% |
| AG-D9302C | 2.5 – 5.0% |
| AG-D9750R | 1.0 – 10.0% |
Two‑pack systems (low‑temperature baking): Use acrylic resin with high hydroxyl value and prolong bake time to improve anti‑graffiti property.
Compatibility testing: Always evaluate compatibility in clear varnish before full‑scale use.
Stir evenly: Ensure thorough mixing for optimal performance.
A: AG‑D9000 is a 100% solvent‑free hydroxy‑functional polydimethylsiloxane with outstanding anti‑graffiti performance, replacing Tego Protect 5000/5000N. AG‑D9001B is a polyester‑modified silicone with lower active content (25%), focusing on slip and anti‑blocking improvement, replacing BYK‑370.
A: AG‑D9000 delivers superior anti‑graffiti performance compared to Tego Protect 5000N, while being solvent‑free and cost‑effective.
A: AG‑D9750R is the best choice for water‑borne systems. It is compatible with both water‑borne and solvent‑borne coatings, with 50% active content for lower dosage requirements.
A: AG‑D9302C replaces BYK‑SILCLEAN 3700 and is a silicone‑modified polyacrylate with lotus‑leaf effect. AG‑D9750R replaces BYK‑SILCLEAN 3720 with higher active content (50%) and lower dosage requirements, and is compatible with both water‑borne and solvent‑borne systems.
A: Yes, but compatibility testing is recommended before full‑scale use. AG‑D9302C and AG‑D9750R offer excellent compatibility in clearcoats without affecting transparency.
A: Store in dry, clean, well‑ventilated warehouses, away from light and heat. Shelf life is 24 months in original unopened packaging.
A: Yes, all AgeSin® AG-D products can be added at any stage of production, including post‑addition.
A: AG‑D9000, AG‑D9001B, and AG‑D9302C have flash points >100°C. AG‑D9750R has a flash point >70°C.
A: AG‑D9000 offers the highest anti‑graffiti and marker resistance performance with 100% active content and solvent‑free formulation.
A: Yes, AG‑D9302C is a direct alternative to BYK‑SILCLEAN 3700, offering comparable lotus‑leaf effect and anti‑marker wiping performance.
| Advantage | Benefit |
|---|---|
| Complete portfolio | One‑stop solution for all anti‑graffiti and easy‑to‑clean needs |
| Direct replacements | Drop‑in alternatives to Tego and BYK benchmarks |
| Superior performance | AG‑D9000 outperforms Tego Protect 5000N |
| Higher active content | AG‑D9750R (50%) enables lower dosage vs. BYK‑SILCLEAN 3720 |
| Solvent‑free options | AG‑D9000 offers zero VOC formulation |
| Cost‑effective | Competitive pricing without performance compromise |
| Proven reliability | 24‑month shelf life, consistent quality |
Sinocure Chemical Group
No. 61, South Industrial Road, Jinan Area of Shandong Pilot Free Trade Zone, China
Email: Info@sinocurechem.com | Tel: +86 15668330235
Website: www.sinocurechem.com
For free samples, technical data sheets, or formulation support, please contact our technical team.
This document is for informational purposes only. Users should conduct their own testing to determine suitability for their specific applications. AgeSin® is a registered trademark of Sinocure Chemical Group. Product names of other manufacturers are trademarks of their respective owners.
