Sinepoxy CA-PEA6327 is an epoxy hardener based on modified Polyetheramine with Nonyl phenol free , light color, low VOC and fast cure. It has high gloss, fine flexibility, good yellowing resistance, strong abrasion strength and also no blushing on the top of epoxy flooring coatings.
Sinepoxy ® CA-PEA6327
(Modified Polyetheramine Epoxy Hardener)
CA-PEA6327 is an epoxy hardener based on modified Polyetheramine with Nonyl phenol free , light color, low VOC and fast cure. It has high gloss, fine flexibility, good yellowing resistance, strong abrasion strength and also no blushing on the top of epoxy flooring coatings.
Fast cure
No blushing
Good abrasion strength
Good yellowing resistance
High gloss and low VOC
Epoxy flooring coatings
Electronic potting epoxy compounds
| Appearance | Clear-light yellow transparent liquid |
| Color(Gardner) | ≤2 |
| Amine Value(JIS Method) | 290 |
| Viscosity(25°C@cps) | 300-500 |
| Density(25°C) | 1.00 |
| AHEW | 96 |
| Added Weight(PHR) | 50 |
| Typical Handling Properties | |
| Gel Time(100g mix at 25 °C@mins) | 30 |
| Thin Film Set Time(15g@3mm, 25 °C@h) | 3.1 |
| Hardness Shore D 70(15g@3mm,25 °C@h) | 10 |
| Remark: Cured with liquid Bisphenol-A based epoxy resin (EEW=190) | |
| Mechanical Properties | |
| Tensile strength(Mpa) | 48.45 |
| Bending strength(Mpa) | 91.81 |
| Compressive strength(Mpa) | 79.25 |
At least 12 months from the date of manufacture in the original sealed container at ambient temperature ( 0-40℃, not lower than 0℃).
Keep away from sunshine.
We offer a variety of options to help you find the right product for your application
Provide formulation optimization support for water-based/solvent-based systems
Full coverage of REACH, FDA, and GB standards
99.8% on-time delivery rate, 10,000-ton production capacity guarantee
