Sinocure Chemical Group Co.,Ltd.

Other Catalysts And Additives

Sinocrsl® TAIC

SINOCRSL® TAIC is a multifunctional olefin monomer containing aromatic heterocycles, mainly used as a crosslinking agent and modifier. It is widely used in a variety of thermoplastics, ion exchange resins, crosslinking agents, modifiers and vulcanizing agents for special rubbers, as well as intermediates for light-curing coatings, photoresists, flame retardants, etc. The premium TAIC is a special cross-linking agent for EVA solar film and a cross-linking agent for solar battery packs.


Send Enquiry
SKU SCGNK012 Category



Synonym Name:Triallyl Isocyanurate;1,3,5-Tri-2-propenyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione;1,3,5-Triallylisocyanurate; 1,3,5-Triallylisocyanuric acid


Molecular structure:





Top grade(liquid)

General Grade(liquid)



Clear liquid or crystal

Slight yellow liquid or crystal

Slight yellow liquid or crystal

White powder or lumps

GC Content/Purity≥




Residuce on ignition %≤


Colour intensity, APHA≤




Acid value(mg KOH/g)≤




Freezing Point






  • SINOCRSL® TAIC is available as cross-linked modifier for a variety of thermoplastic (polyethylene, polyvinyl chloride, chlorinated polyethylene, ethylene vinyl acetate (EVA), polystyrene, etc.). The amount is generally 1-3% by weight in peroxide cross-linking system, dicumyl peroxide (DCP) is 0.2 to 1% in addition; radiation cross-linking system 0.5 to 2% by weight. The cross-linked products can significantly improve heat resistance, flame resistance, solvent resistance, mechanical strength and electrical properties. It can significantly improve the product quality, and no odor compare with the peroxide cross-linking system. It is typical for polyethylene, polyethylene and chlorinated polyethylene, polyethylene and EVA, cross-linked polyethylene cables and other high or low-foam products.
  • SINOCRSL® TAIC is available as co-vulcanizing agent for ethylene-propylene rubber, fluorine rubber, CPE and other special rubber (with DCP and the amount is 0.5 to 4% by weight), can significantly shorten the curing time,improve strength, abrasion resistance, insoluble, corrosion resistance.
  • SINOCRSL® TAIC is available as cross-linking agent for acrylic, styrene-type ion exchange resin, has less usage, higher quality than di-vinylbenzene cross-linking agent, can prepare for ionic exchange resins with anti-pollution, high strength, large diameter, heat-resistance, acid and alkali resistance, excellent anti-oxidation properties. It is the newly developed and excellent prospective ion exchange resins.
  • SINOCRSL® TAIC is used as modifiers for polyacrylate, polyethylene alkyl acrylate etc., can significantly improve heat resistance, optical properties and performance of process. It is typical for heat-resistant modification of polymethyl methacrylate glass.
  • SINOCRSL® TAIC can be used as modifier as epoxy , DAP (Diallyl phthalate) and can improve the heat resistance, adhesion, mechanical strength and dimensional stability. It is typical for modification for epoxy potting material and encapsulation material.
  • SINOCRSL® TAIC can be used as cross-linking agent and modifier for unsaturated polyester and thermoplastic polyester, it can significantly improve heat resistance, chemical resistance, dimensional stability, weather resistance and mechanical properties. It is typically used to improve heat resistance of the hot-press unsaturated polyester fiberglass, and using temperature of modified product can be above 180 ℃.
  • The homo-polymer of TAIC (polytriallyl isocyanurate) can be used for bonding glass and ceramics because of its clear, hard, heat-resistant, excellent electrical insulation. It is typically used to manufacture multi-layer safety glass.
  • SINOCRSL® TAIC can be used as inner plasticizer of polystyrene: Styrene copolymerization with TAIC, can obtain a transparent, anti-broken product.
  • SINOCRSL® TAIC can be used as protecting agents for metal: pre-polymer of TAIC bakes on metal surface,and the coating has a very good heat resistance, radiation resistance, weather resistance and electrical insulation. It is typically used in insulating materials of manufacture of printed circuit boards and other microelectronic products.
  • SINOCRSL® TAIC can be used as intermediates of photocurable paint, photo-resist, flame-retardant cross-linking agent; It is typically used in synthesis of high effective flame retardant TBC and DABC.

Packaging and Shipping:

Liquid: 25kg or 200kgs/drum.

Powder:20kg/carton or 25kg/bag


Stored in a cool dry place out of direct sunlight.


Other name

Triallyl Isocyanurate

Cas No.


Molecular formula


Molecular weight



200kg/drum, 20kgs/Carton, 25kgs/bag, 25KGs/drum


There are no reviews yet.

Be the first to review “Sinocrsl® TAIC”

Your email address will not be published. Required fields are marked *